- Do Command strips ruin paint?
- Can you use a tension rod to hang curtains?
- What can I use instead of a curtain rod?
- How do I keep my tension rod from falling down?
- How do you keep tension curtain rods up?
- How do you hang curtains without rods and hooks?
- Do curtain rods need studs?
- How do you hang blinds without drilling holes?
- Can I hang curtains over blinds?
- Do curtain rods go on trim or wall?
- Can you hang curtain rods without drilling holes?
- How far should curtain rods stick out from wall?
- Do you need two curtain rods to hang a valance?
- Can you hang curtain rods with 3m?
- What is the proper placement of curtain rods?
Do Command strips ruin paint?
The hooks and adhesive strips come in one package.
Forget about nails, screws and tacks, Command brand hooks are fast and easy to hang.
Using the revolutionary Command Adhesive, stick to many surfaces, including paint, wood, tile and more.
Yet, they also come off leaving no holes, marks, sticky residue or stains..
Can you use a tension rod to hang curtains?
Hang Curtains With Tension Rods If you have traditional paned windows with frames, tension rods that stretch from one side of the frame to the other are a subtle and sophisticated way to hang curtains.
What can I use instead of a curtain rod?
An old piece of fence or a coatrack that you don’t use any longer is a great way to create your own DIY curtain rod. Just take a section of fence or rack and hang a few hooks on it to hold your curtains. This is a great rustic décor idea and a really cheap one, too.
How do I keep my tension rod from falling down?
The caps on tension rods are often made of plastic, but even rubber ones are so incompressible that moist, smooth surfaces such as tile or fiberglass can’t hold them. You can fix that by gluing rubber shelf lining material to the ends with strong glue – two-part epoxy or contact cement.
How do you keep tension curtain rods up?
Use adhesive shower curtain rod holder or rod retainer.Use non-slip rubber pads or felt pads.Glue rubber shelf lining on the wall.Use closet pole holders if the walls are dry.
How do you hang curtains without rods and hooks?
How to Hang Your Curtains Without Using a Rod1 – Hooks. There are a number of hooks you can use to hang your curtains. … 2 – Drawer Pulls. … 3 – Rope. … 4 – Tree Branches. … 5 – Sports Equipment. … 6 – Nails. … 7 – Copper Pipes. … 8 – Upholstery Tacks.More items…•
Do curtain rods need studs?
You’ll need screws, a screwdriver, a level, a power drill, a stud finder, and your curtain rod which should come with corresponding brackets. Also, if your curtains are very heavy, or the curtain rod is longer than 48 inches, you will need a center bracket for additional support.
How do you hang blinds without drilling holes?
How To Hang Blinds Without Drilling HolesMagnetic Blinds. The magnets at the back of these brackets make installation a rather seamless process. … Tension Rods. Hang these blinds on a tension rod, which you can position inside your window trim. … Command Strips. … Self-Adhesive Blinds.
Can I hang curtains over blinds?
Can you put curtains over blinds? Absolutely! Combining curtains and blinds adds extra depth and elegance to your windows. For some rooms, hanging curtains on their own is good enough.
Do curtain rods go on trim or wall?
Generally, hanging curtain brackets on the wall above and outside the window molding looks best, since it allows fabric to fall gracefully. If you have detailed window frames you don’t want to cover, an inside mount (hanging curtains within the frame, as you would with a tension rod) can work.
Can you hang curtain rods without drilling holes?
Just position the brackets on the corners of your window frame, tap them in with a rubber mallet or hammer and they’re good to go. No damage, nails or drills, and you’ll achieve perfectly aligned curtains every time! Try Kwik-Hang curtain rod brackets today.
How far should curtain rods stick out from wall?
When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
Do you need two curtain rods to hang a valance?
We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).
Can you hang curtain rods with 3m?
Hanging curtains is as easy as 1-2-3 with Command™ Forever Classic Large Metal Hooks.
What is the proper placement of curtain rods?
The ideal position for the curtain rod is 6 inches to the left/right of the window trim. You may need to make adjustments based on how much linear space is needed for the curtain fabric to hang easily and look “full”. The finials, or decorative ends of poles may extend past the 6 inches.